A wire is a single, usually cylindrical, string of metal. A cable is two or more wires running side by side and bonded, twisted or braided together to form a single assembly. Wires and cables are used to bear mechanical loads and to carry electricity and telecommunications signals cross over buildings and campus. The telecommunications cabling infrastructure of these buildings and campus consists of a number of standardized smaller elements (hence called structured) subsystems. Entrance Facilities, Equipment Rooms and Telecommunication Room are three physical subsystems. Then there is Backbone cabling subsystem to connect between the entrance facilities, equipment rooms and telecommunications rooms, and there is Horizontal cabling subsystem to connect telecommunications rooms to individual outlets or work areas on the floor. Finally there is Work-Area Components to network end-user equipment to outlets of the horizontal cabling system.
HOSIWELL TECHNOLOGY CO., LTD. manufactures many types of structured (networking) cables for those subsystems. With the factory in Thailand and with continual improvement upon the manufacturing processes involving finishing, shielding, jacketing, and outer insulation we are proud to supply and export persistently high level of structured (networking) cable products in accordance with the standard of TIA EIA-568-set. Horizontal Cable
Horizontal Cables
Cat.5e FTP Horizontal Cable Category 5 cable is a twisted pair high signal integrity cable type. The e stands for 'enhanced'. and FTP stands for Foil Twisted Pair or Foiled Twisted Pair.
Cat.5e SFTP Horizontal Cable S stands for shielding, usually with a wire mesh to minimize the outside interference.
Cat.5e UTP Horizontal Cable UTP stands for Unshielded Twisted Pair. It is a cable type with one or more pairs of twisted insulated copper conductors contained in a single sheath. UTP cables are the most common type of cabling used in desktop communication applications.
Cat.6 UTP Horizontal Cable Cat.6, is a cable contains four twisted wire pairs. the increase in performance with Cat.-6 comes mainly from better insulation.
Cat.5e FTP Patch Cable Patch Cables are made of stranded copper conductors for flexibility. This construction is great for the flexing and the frequent changes that occur at the wall outlet or patch panel.
Cat.5e SFTP Patch Cable Patch Cables are made of stranded copper conductors for flexibility. This construction is great for the flexing and the frequent changes that occur at the wall outlet or patch panel.
RJ11 / RJ25 Modular Jack "RJ" for Registered Jack is part of the Code of Federal Regulations in the United States.
RJ45 / RJ11 Modular Plug & Cover For cable termination use, RJ-type is a physical interface often used to finish twisted pair type cables and has pins of electric connections.
Surface Mount Box & Floor Workstation Module
Floor Workstation Module Easily to use, press the button to open and release the button together with push down the cover to close.
Surface Mount Box These boxes are available in single or dual outlet versions complete with Cat.5e or Cat.6 jacks.
Faceplate
UK & US Type For work area application:US type Low profile 6mm thickness. 1 to 6 ports optional.
110 Field Termination Kits The 110 connecting block was developed in 1970 which provided a higher-density crossconnect. now the AT&T 110 block is the de facto standard for high-density field terminations.
110 Field Ternminated 19 inch Panel Each panel includes adequate connection blocks to complete each 25-pair termination strip on the 100 block.
110 Patch Plug The 110 patch plug utilizes internal pair isolation to provide electrical isolation between pairs to improve cross-talk performance so that the matched plug and connecting block exceed Cat.5e/Cat.6 transmission requirements.
Terminated 110 Patch Cords It can be used for patching network or test equipment to 110 connecting blocks.
19 Inch Panel & Brackets
19" Cable Management Panel Standard 19 inch cable management rack utilizes a hybrid steel construction, making it ideal for use with heavy data or electronic equipment.
19" Universal Fitting Panel Accept shield and un-shield RJ45 modular jacks and other fiber optic cable and coaxial cable coupler insert. For example: ST, SC, BNC or F Type coupler insert etc.
Cat.5e 19" Rack Mount Patch Panel Cat.5e 19" Rack Mount Patch Panel EIA/TIA-568-B.2 Cat.5e compliant, high density design, With RJ45 port and liable system, universal wiring for both T568A and T568B.
Cat.6 19" Rack Mount Patch Panel Patch panels offer the convenience of allowing technicians to quickly change the path of select signals, without the expense of dedicated switching equipment.
Hinged Brackets for 19" Panels The brackets can be used for mounting any 19" rack mount patch panel and wire management.
Tooling
Crimping Tool Series These tools feature an easy to hold, ergonomically designed handle that helps reduce fatigue when trimming wire.
